forum.z3x-team

Samsung Tool, Nec Smart Tool, China Editor, Benq Siemens Tool, LG Tool

Help to repair IMEI and Serial Number Galaxy S3

Moderators: igorrkko, mk.

Page: 1

Author Post
Member
Registered: Sep 2013
Posts: 17
Location: Jaú, SP - Brazil
Good day. Sorry for my English, I use a translator. This is my first and I eat BOX faced The Following situation:

Selected model: I9300
Selected port: COM3 USB Serial Port
Selected port speed: 115200
Searching Samsung Modem ... detected COM4
Reading phone info ...
Software version: I9300UBALF3/I9300ZTOALF1/I9300UBLF2/I9300UBALF3
IMEI: 004999010640000
Product code: GT-I9300RWLZTO
Done with Samsung Tool v.15.5

Selected model: I9300
Selected port: COM3 USB Serial Port
Selected port speed: 115200
Searching ADB device ... OK
Reading phone info ...
Model: GT-I9300
Android version: 4.0.4
Product code: GT-I9300RWLZTO
Phone version: I9300UBLF2
PDA version: I9300UBALF3
CSC version: I9300ZTOALF1
IMEI: 004999010640000
Phone S / N: RQ1C80AACFD
Super Checking user right ... true
Reading data from phone ... OK
Repairing network settings ... OK
Writing data to phone ... OK
Rebooting phone ... OK
Now connect phone to UART cable
Checking phone at COM3
No answer from phone
Done with Samsung Tool v.15.5

Either Windows XP or Windows 8 x64 the error is The Same, Therefore, rule out the Possibility of the operating system. Although Windows XP I have the following port:
COM1 communication port
COM3 USB SERIAL PORT

And the Windows 8 x64 only is:
COM3 USB SERIAL PORT

Any tips so I can resolve this issue?! It is problem in UART cable? When asked to connect to it, it flashes the lights (one on each side), however, nothing happens. The model is: SAM C3300K.
Member
Registered: Sep 2013
Posts: 17
Location: Jaú, SP - Brazil
Checked again in Device Manager and found missing the following drivers:

CDC Communication Interface
CDC Communication Interface
CDC Communication Interface
CDC Communication Interface
CDC Communication Interface
CDC Communication Interface
CDC Communication Interface
Suspend Commeon
unknown Device

Totaling 09 missing drivers that I believe may be interfering for connecting the UART.

I'm sure the drivers concern the Galaxy S3, for when access:

* # 7284 # and change the UART to USB MODEM and PDA, all are active, with the exclamation on them, but do not install and do not know where to get the download.

Someone gives?
Professional
Registered: Mar 2012
Posts: 1590
Location: India
After phone Successfuly reboot,
[Not when phone is starting ]
connect it to uart cable..
make sure you have special uart cable [ Z3X Micro UART Autoignition Cable ]
with 560K resistor.

Which devices are there in COM-Port Section ?
_______________
BR
Nishith B.
« Last edit by Nishith on Tue, 10.Sep.13 17:26. »
Member
Registered: Sep 2013
Posts: 17
Location: Jaú, SP - Brazil
Correct. I make the switch cable as requested in the application of BOX.
However UART cable to make available is what came with it. SAM Model C3300K, the GPG Industries, apparently there is no resistor attached to it, having one end connecting RJ-45 and other micro USB.

The program only have the option of USB SERIAL PORT COM5 port.

It is possible to insert a resistor this cable or do you recommend for me to make a scheme as that found on the internet until the arrival of a new?!

This scheme would have to confirm with my on here?
Member
Registered: Sep 2013
Posts: 17
Location: Jaú, SP - Brazil
Another failed attempt. Now with version 4.1.2 of Android.

Selected model: I9300
Selected port: COM5 USB Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: GT-I9300
Android version: 4.1.2
Product code: Not Active
Phone version: I9300XXELLA
PDA version: I9300ZSEMC1
CSC version: I9300OZSEMC1
IMEI: 004999010640000
Phone S/N: 00000000000
Checking Super user right... true
Reading data from phone... OK
Repairing network settings... OK
Writing data to phone... OK
Rebooting phone... OK
Now connect phone to UART cable
Checking phone at COM5
No answer from phone
Done with Samsung Tool v.15.5

And the cable I'm using is like this:
http://gsmonlineshop.com/product_images/k/445/SAM_C3300K__29267_zoom__17230_zoom.jpg

Given these aspects is necessary cable with 560k resistor?
Professional
Registered: Mar 2012
Posts: 1590
Location: India
Cable pinout is already uploaded on support !!
_______________
BR
Nishith B.
Member
Registered: Sep 2013
Posts: 24
Location: England
Hi I had same problem until I changed the port speed in my device manager for the box.I also noticed in your second post that youve lost your product code I would make a note of it from your first post if I were you
Member
Registered: Sep 2013
Posts: 17
Location: Jaú, SP - Brazil
Could you pass me the detailed configuration of your port in Device Manager?!
Member
Registered: Sep 2013
Posts: 24
Location: England
Hi
in device manager under portproperties:
the bits per second is now 115200 .
data bits is 8 .
parity is none
.stop bits is 1.
flow control is none.
Hope it helps !
_______________
if the best things in life are free,then how come I don't get them ?
Member
Registered: Sep 2013
Posts: 17
Location: Jaú, SP - Brazil
My settings are the same. But ... There is no connectivity yet.

And in advanced, how are you?!
Which operating system do you use?!
Member
Registered: Sep 2013
Posts: 1
stock rom 4.1.1 imei rpeir ok
Member
Registered: Jul 2013
Posts: 5
I have the same problem yet I changed the port speed in my device manager for the box in Xp. Stock rom 4.1.2
But "no answer from phone" appears
I think that the problem is in Uart cable. I use GSS C3300K and S7070
Member
Registered: Sep 2013
Posts: 17
Location: Jaú, SP - Brazil
Already tested the BOX and cable UART on another computer. It worked perfectly, however, I need to install and run on my device.


Has anyone managed to install so satisfactory in a LAPTOP with WINDOWS 8 64-bit version?!
Member
Registered: Mar 2011
Posts: 21
Same problem:
CDC Communication Interface
CDC Communication Interface
CDC Communication Interface
CDC Communication Interface
CDC Communication Interface
CDC Communication Interface
CDC Communication Interface
Suspend Commeon
unknown Device

Someone can help me????

Page: 1

forum.z3x-team is powered by UseBB 1 Forum Software