forum.z3x-team

Samsung Tool, Nec Smart Tool, China Editor, Benq Siemens Tool, LG Tool

s5610 flashing

Moderators: igorrkko, mk.

Page: 1

Author Post
Member
Registered: Apr 2013
Posts: 20
how to flash s5610
Samsung and China Editor support
Registered: May 2009
Posts: 3760
Location: UKRAINE
Flashing not suported yet, but will be added.
Here is the link for original flasher
https://docs.google.com/file/d/0BxTZky-JUM6Mbzd4NUM3YjBXQ0U/edit?usp=sharing
Member
Registered: Jan 2016
Posts: 5
Hello Z3X members and admins,
I have flashed my s5610 phone.I downloaded a zip flash file with samsung tool pro.
After flashing I can not turn it on.Why is this happening?
Thank you for your help in advance.

Here is the log file:
UNLOCK INSTRUCTIONS:
Micro-UART cable only:
1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
2. Connect phone and press power button.

Operation: Flash
Selected model: GT-S5610
Software version: 25.5

Load model info... OK
Loading BIN PTT file... OK
Loading CSC PTT file... OK
Reconnect battery and connect phone to USB cable
Phone detected
Checking device descriptions... OK
Link type set to USBH
Reading OTP register... OK
OTP register: 00000000
Unprotected device detected
Reading product ID... OK
Product ID: 0x401A739C EC4556A
Reading SCROM version...
SCROM Version - PNX6729 v. 1.10
Chipset Version - 3C11
Downloading Loader in Internal RAM... OK
Wait for device... OK
Checking device descriptions... OK
Loader verison... 7.5.16
Nand Flash memory SSG_K522H1HACA-A060 detected
Flash memory parameters
Capacity params: 2 Datawidth - 2048 Block number - 64 Block size - 0 Buffer prog.
Timing params: 2 ms erase block time - 250 us write buffer time
Send Loader and NAND Flash Parameters...
Loader parameters
Write Test flash params: 0x0 Test Address - 0 Test size
Buffer params: 3 Buffer type - 134217728 Buffer size - 32768 Tansfert size - 32768 Tansfert RAW size
Bad Block params: 42 Bad block reservoir size
SW Boot compatible
Get First Block... OK
Prepare First Block... OK
Partition Table in Firstblock needs to be updated from SW Boot file
FirstBlock Must Be updated
Erase First Block... OK
Set Partition Params... OK
Downloading FirstBlock in Flash... OK
Init Bad Block Managment... OK
Send Verify Cmd... OK
Erasing Partition_1... OK
Erasing Partition_2... OK
Erasing Partition_3... OK
Erasing Partition_4... OK
Erasing Partition_5... OK
Erasing Partition_6... OK
Erasing Partition_7... OK
Erasing Partition_8... OK
Check Protected Device... OK
Programming Partition_1
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_1 'IMAGE'... OK
Check CRC32... OK
Programming Partition_2
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_2 'LCDACT'... OK
Check CRC32... OK
Programming Partition_3
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_3 'MAIN'... OK
Check CRC32... OK
Programming Partition_4
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_4 'PAGED'... OK
Check CRC32... OK
Programming Partition_5
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_5 'a'... OK
Check CRC32... OK
Programming Partition_6
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_6 'b'... OK
Check CRC32... OK
Programming Partition_7
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_7 'c'... OK
Check CRC32... OK
Programming Partition_8
Prepare CRC32... OK
Set Partition Params... OK
Download Partition_8 'd'... OK
Check CRC32... OK
Update RCB... OK
Flashing done (time - 00:01:21)

Done with Samsung Tool PRO v.25.5
Samsung and China Editor support
Registered: May 2009
Posts: 3760
Location: UKRAINE
Try to flash it with original flasher and post result here.

Page: 1

forum.z3x-team is powered by UseBB 1 Forum Software